09/27/09

 Installation was really easy as all of the work has now been done. just remove the old harness and computer box (neatly just in case you ever need it again and then install the new wiring with the modified bosch fittings. connect everything up. I laid the MS and the relay box on the wing of the car just whilst I was setting all of the constants (last section but I will add one more on tuning) and testing everything. then I undid one of the metal covers on the relay cable so I could twist the connector sideways, pushed it through the original harness hole and resealed it. took 3 hours max to install everything and most of that was using up a bag of zip ties (cable ties)

all done almost ready to start

Home | The megasquirt unit and relay box | wiring | Throttle position sensor | Installation | First start | Replacing the Rear Axles on my Mercedes R107 450sl

This site was last updated 03/04/09